標準編號 標準中文名稱 標準英文名稱
機氣量測定方法 of gas ofwater-ring vacuum pump and compressor
JB/T10134-1999 帶真空泵交流發電機 技術條件 JB/T53019-1999 油擴散真空泵 產品質量分等 JB/T53022-1999 滑閥真空泵 產品質量分等
NF E51-291-1996 壓縮機和真空泵.安全要求.第 (Compressors and vacuum pumps. Safety requirements
2部分:真空泵 . Part 2 : vacuum pumps.) NF E51-290-1996 壓縮機和真空泵.安全要求. (Compressors and vacuum pumps. Safety requirements
第1部分:壓縮機 . Part 1 : compressors.)
NF X10-501-1976 真空技術.詞匯.真空泵 (Vacuum technology. Vocabulary. Vacuum pumps.)
ANSI/ASME PTC 9-1974 性能試驗規范.容積式
壓縮機、真空泵和鼓風機 (Performance Test Code - Displacement Compressors,
Vacuum Pumps and Blowers) ANSI/UL 1450-2003 電動空氣壓縮機、真空 (Motor-Operated Air Compressors, Vacuum
泵和涂漆設備 Pumps, and Painting Equipment )
ASME PTC 9 Erratum-1972 容積式壓縮機, (Displacement compressors, vacuum pumps,
真空泵和鼓風機.正誤表 and blowers; Erratum)
ASME PTC 9-1970 容積式壓縮機,真空泵 (Displacement compressors, vacuum pumps, and blowers) 和鼓風機
BS EN 1012-1-1997 壓縮機和真空泵.安全 (Compressors and vacuum pumps - Safety
要求.壓縮機 requirements - Compressors) BS EN ISO 14847-1999 轉式變?nèi)菡婵毡? (Rotary positive displacement pumps -
技術要求 Technical requirements)
BS EN 1012-2-1997 壓縮機和真空泵.安 (Compressors and vacuum pumps - Safety requirements
全要求.真空泵 - Vacuum pumps)
EN 1012-1-1996 壓縮機和真空泵 安全 Compressors and vacuum pumps - Safety
要求 第1部分：壓縮機 requirements - Part 1: Compressors
EN 1012-2-1996 壓縮機和真空泵 安全要 Compressors and vacuum pumps - Safety
求 第2部分：真空泵 requirements - Part 2: Vacuum pumps
DIN EN 1012-1-1996 壓縮機和真空泵.安全 (Compressors and vacuum pumps, safety requirements -
要求.第1部分:壓縮機 Part 1: Compressors; German version EN 1012-1:1996)
DIN EN 1012-2-1996 壓縮機和真空泵.安全 (Compressors and vacuum
pumps, safety requirements
要求.第2部分:真空泵 - Part 2: Vacuum pumps; German version EN 1012-2:1996)
DIN 28432-1996 真空技術.膜片真空泵 (Vacuum technology - Acceptance specifications
的驗收規則 for diaphragm vacuum pumps) DIN 45635-13-1977 機器噪聲測量.空氣載 (Measurement of airborne noise emitted by
聲測量.包面法.空氣壓縮 machines; enveloping surface method,
機包括真空泵（活塞式. compressors, vacuum pumps included (displacement-,
渦輪式和噴射式壓縮機） turbo- and jet compressors)) DIN 28426-2-1976 真空技術.旋轉活塞真 (Vacuum technology; acceptance specifications
空泵的驗收規則.高真空 for roots vacuum pumps for the range of medium vacuum)
范圍內的搖桿式活塞真空泵
DIN 28400-2-1980 真空技術.名稱和定義.真空泵 (Vacuum technology; terms and definitions,
vacuum pumps)
DIN ISO 3019-3-1984 液壓傳動.變?nèi)菡婵毡煤? (Hydraulik fluid power; positive displacement
馬達.裝配法蘭盤和軸端的尺寸 pumps and motors; dimensions and identification
及識別代碼.第3部分:多邊形法 code for mounting flanges and shaft ends; part
蘭盤(包括圓形法蘭盤) 3: polygonal flanges (including circular flanges))
DIN ISO 3019-2-1991 液壓傳動.變?nèi)菡婵毡煤? (Hydraulic fluid power; positive displacement
馬達.裝配法蘭盤和軸端的尺寸 pumps and motors; dimensions and identification
及識別代碼.第2部分:兩孔與四 code for mounting flanges and shaft ends;
孔法蘭與軸端.米制系列 part 2: 2 and 4-hole flanges and shaft ends, metric
series; identical with ISO 3019-2:1986)
DIN 28426-1-1983 真空技術.旋轉真空泵.在近 (Vacuum technology; acceptance specifications
似真空和高真空范圍內的閉塞 for rotary plunger vacuum pumps, sliding vane
閥真空泵和旋轉閥真空泵的驗 rotary vacuum pumps and rotary piston vacuum
收規則 pumps for the ranges of rough and medium vacuum)
DIN 28431-1987 真空技術.液體環式真空泵的 (Vacuum technology; acceptance specifications
驗收規程 for liquid ring vacuum pumps) DIN 28427-1983 真空技術.蒸氣壓低于1mbar的 (Vacuum technology; acceptance specifications for
擴散泵和蒸氣噴射真空泵的驗 diffusions pumps and vapour jet vacuum pumps
收規則 for vapour pressures of the pump fluid 1 mbar)
DIN 28430-1984 真空技術.以蒸汽作為驅動介 (Vacuum technology; rules for the measurement
質的蒸汽噴射真空泵和蒸汽 of steam jet vacuum pumps and steam jet
噴射壓縮機用測量規則 compressors using steam as the working fluid)
JB/T6921-2004 羅茨真空泵機組 JB/T8540-2004 水蒸汽噴射真空泵 JB/T10462-2004 水噴射真空泵 JB/T7265-2004 蒸汽流真空泵
UL 1450-2003 電動空氣壓縮機、真空泵和噴 (Motor-operated air compressors, vacuum pumps
漆設備 , and painting equipment) JIS B8384-2000 液壓.變?nèi)菡婵毡谩C(jī)動泵 (Hydraulic fluid power -- Positive displacement
和整體傳動裝置.穩態性能測定 pumps, motors and integral transmissions --
Determination of steady-state performance)
JIS B8317-2-1999 蒸氣真空泵.性能特性的
測定.第2部分:臨界后壓力的測定 (Vapour vacuum pumps --Measurement of performance
characteristics -- Part 2: Measurement of critical
backing pressure)
JIS B8323-2003 水封式真空泵 (Water ring vacuum pumps) JIS B8317-1-1999 蒸氣真空泵.性能特性的測定 (Vapour vacuum pumps -- Measurement of performance
.第1部分:流量容積比率的測定(泵速) characteristics -- Part 1: Measurement of volume
rate of flow (pumping speed)) JIS B8385-2000 液壓.變?nèi)菡婵毡谩C(jī)動泵和整 (Hydraulic fluid power -- Pumps, motors and integral
體傳動裝置.參數定義和字母符號 transmission -- Parameter definitions and letter
symbols)
JIS Z8126-2-1999 真空技術.詞匯.第2部分:真 (Vacuum technology -- Vocabulary -- Part 2:
空泵和相關條款 Vacuum pumps and related terms)
ISO 1607-2-1989 變?nèi)菡婵毡?性能特性測量. (Positive-displacement vacuum pumps; measurem
第2部分:極限壓力的測量 ent of performance characteristics; part 2:
measurement of ultimate pressure) ISO 16330-2003 往復式變?nèi)菡婵毡煤捅醚b置 (Reciprocating positive displacement pumps and
.技術要求 pump units - Technical requirements)
ISO 3529-2-1981 真空技術.詞匯.第2部分: (Vacuum technology; Vocabulary; Part 2 : Vacuum
真空泵和有關術語.三種語言版 pumps and related terms Trilingual edition)
ISO 1608-2-1989 蒸汽真空泵.性能特性的測 (Vapour vacuum pumps; measurement of performance
量.第2部分:臨界前級壓力的測量 characteristics; part 2: measurement of critical
backing pressure)
ISO 1608-1-1993 蒸汽真空泵.性能特性的測量. (Vapour vacuum pumps; measurement of performance
第1部分:容積流量速度的測量(泵速) characteristics; part 1: me
asurement of volume
rate of flow (pumping speed)) QB/T1444-1992 ZBK型輕式專用兩葉羅茨真空泵 QB/T1445-1992 濕式羅茨真空泵性能測試方法 JB/T6533-2005 旋片真空泵 JB/T7674-2005 羅茨真空泵 JB/T7675-2005 往復真空泵
GB/T19955.1-2005 蒸汽流真空泵性能測量方法 第1部分：體積流率(抽速)的測量
GB/T19955.2-2005 蒸汽流真空泵性能測量方法 第2部分：臨界前級壓力的測量
GB/T19956.1-2005 容積真空泵性能測量方法 第1部分：體積流率(抽速)的測量
GB/T19956.2-2005 容積真空泵性能測量方法 第2部分：極限壓力的測量 JB/T8540-2004 水蒸汽噴射真空泵 JB/T10462-2004 水噴射真空泵
